To ensure that high quality is maintained, each unit is thoroughly inspected, both mechanically and electrically. There is no REFERENCE port as the bridge contains an internal 50 ohm reference. The bridge may be connected directly to a network or spectrum analyzer. The REFLECTED port on all EAGLE bridges is an RF port. ![]() These bridges have three ports: SOURCE, DUT(device under test) and REFLECTED. Power rating is a maximum of five watts up to one minute or 1.5 watt continuous. Connectors are heavy duty with field replaceable center pins. For measuring VSWR for VHF, UHF, Cellular, PCS and 2.45 GHz ISM.Įach bridge is constructed in a machined aluminium case. This bridge yields laboratory performance in directivity and open/short ratio over a frequency range of 5 to 3000 MHz. ![]() The RLB254NF return loss bridge has been designed for lasting service in either laboratory or field service applications. ![]() With the high degree of accuracy found in EAGLE bridges error correction is not absolutely necessary. Even spectrum analyzers contained in communications service monitors can be used. The bridges may also be used for coupling two generators for inter-modulation testing, or power splitting for levelling systems.Īll EAGLE bridges have a true RF output they can be connected directly to vector or spectrum analyzers. With directivity ratings of better than 40 dB, EAGLE bridges yield excellent results. Return loss bridges are useful in measuring VSWR, or return loss of filters, mixers, antennas and amplifiers.
0 Comments
Leave a Reply. |